M2110C 內圓磨床介紹：

M2110C 內圓磨床的進給及補償，由兩個互不干涉的傳動機構執行，進給可采用手動或液動二種進給方式。

機床設有跳進、跳出機構，因此退出砂輪進行測量或修整后不必重新手動對刀。

工作臺快退設有中停裝置，快退距離可按需調整，以減少輔助時間。

工作臺啟動手把設有安全聯鎖裝置，確保裝卸和測量工件時的安全性。

機床砂輪軸轉速為21000轉/分，可提高磨削小孔時的質量。

用戶特殊訂貨，機械磨頭可改裝電主軸變頻調速，以適應磨削小直徑內孔。

主要特點:

機床床身采用鑄鐵澆注，結構緊湊，穩定性好，剛性強。

機床參數的設置，調整采用觸摸屏形式，可實現人機對話，操作直觀方便。

機床進給采用日本三菱伺服電機通過聯軸器驅動滾珠絲桿運動，導軌采用十字交叉式滾柱鋼導軌，度高，剛性好。

工作臺往復運動的液壓部分由PLC動控制。

機床工件的夾緊由三爪卡盤、氣動夾具、液壓夾具、薄膜夾具等多種夾具可供用戶選配。

磨削用砂輪軸采用高速電主軸，由靜止變頻器控制，實現無極調速。

The feed and compensation of the M2110C internal grinding machine are carried out by two non-interfering transmission mechanisms, and the feed can be either manual or hydraulic.

The machine tool has a jump and jump mechanism, so it is not necessary to manually reset the tool after exiting the grinding wheel for measurement or dressing.

The table quick retreat is equipped with a middle stop device, and the fast retreat distance can be adjusted as needed to reduce the auxiliary time.

The starting handle of the workbench is equipped with a safety interlock device to ensure the safety of loading, unloading and measuring the workpiece.

The grinding wheel shaft speed is 21000 RPM, which can improve the quality of grinding small holes.

Customer special order, mechanical grinding head can be modified electric spindle frequency conversion speed regulation, to adapt to grinding small diameter holes.

Main features:

Machine bed using cast iron casting, compact structure, good stability, strong rigidity.

The setting and adjustment of the parameters of the machine tool adopt the touch screen form, which can realize the man-machine dialogue and the operation is intuitive and convenient.

The machine feed adopts Japanese Mitsubishi servo motor to drive the ball screw movement through the coupling, and the guide rail adopts cross-type roller steel guide rail with high degree and good rigidity.

The hydraulic part of the reciprocating movement of the table is controlled by PLC.

The clamping of the workpiece of the machine tool is made up of three jaw chuck, pneumatic clamp, hydraulic clamp, film clamp and so on.

Grinding wheel shaft adopts high-speed electric spindle and is controlled by static frequency converter to realize stepless speed regulation.

主要技術參數：

本頁面主要介紹M2110C 內圓磨床的特點及技術參數，若想了解更多關于內圓磨床的其他型號，請繼續瀏覽本網站。