機床的主要特點 Main Characteristics

? 機床床身采用優質鑄件澆鑄，剛性好，結構穩，變形小;

機床采用床頭箱固定在進給滑板上工件進給，車刀及砂輪作往復結構布局，車刀置砂輪前面;

? 工件進給滑板及砂輪工作臺滑板采用高剛度十字交叉滾珠導軌;

? 工件進給由伺服電機經聯軸器帶動高精度滾珠絲桿副來實現，進給和補償為同一傳動鏈，結構緊湊，精度高;

工件主軸采用箱體主軸結構，主軸軸承采用日本光洋高精度成對軸承，回轉精度高，穩定性好，主軸回轉采用變頻調速;

機床配有防水全封閉罩殼，觀察窗保證長期觀察清晰，耐油污并保證砂輪破碎后不飛濺傷人;

機床采用后置電器箱和前置回轉式操作臺以及獨立的循環啟動按鈕。電箱帶熱交換器，以及確保在高溫期間正常運行:

機床可據加工零件設計制作專用夾具:

機床采用西門子808D數控系統，用戶如有特殊要求可選用其他控制系統;

 ? The machine bed adopts the casting piece with the features of good rigidityand small deformation

 ? The headstock is fixed on the feed slide for achieving work feed. The gri.

 ? wheel reciprocatian is also used.

 ? Work feed guideway and gri. wheel worktable guidaway adopt the crossedroller type.

 ? Work feed can be performed by the servo motor through the coupling viahigh-precision ball leadscrew pair.Table reciprocation mavem ent can be achieved by mechanical oscillationwhich its reci speed is adjusted by the freg.-conversion speed reeulator.Cartridge-type work spindle is used, The high-precisian matched spindlebearing is adopted with the features of high rotating accuracy and goodreliability.

 ? Super-wide worktable and feed slide are used, thus improving good rigidity.

 ? It's totally enclosed with guards to prevent swarfs from splashing.

 ? The rear-mounted electrical cabinet and front-mounted control cabinet arealso used, The heat-exchanger in the electrical cabinet is also provided.

 ? The special fixture can also be desiened according to the machined workparts